1. Working environment: Please keep the plastic container clean. A, B components are strictly according to the weight ratio, accurately weighed, and stirit evenly along the inner wall of the container clockwise until it is used for 3-5 minutes.
2. According to the operating time and amount of glue deployment, to avoid waste. When the temperature is lower than 15 ° C, please pre-heat the A glue to 30 ° C and then adjust the rubber, easy to operate (low temperature, A glue will thicken ); After use must seal the lid,to avoid the product due to moisture absorption scrapped.
3. When the relative humidity is more than 85%, the surface of the cured product can easily absorb the moisture in the air to form a whitemist.Therefore,when the relative humidity is more than 85%, it is not suitable for room temperature curing. It is recommended to use the heating and curing.
4. The lid must be sealed after use to avoid the product being scrapped due to moisture absorption.
Tips:
1. If it is used to contact food after curing, the temperature of the food should not exceed 50 degrees Celsius.
2. When the hardness is higher than 82D (Shaw hardness), it can be directly polished.
3. The mixing quantity should not exceed 5kg, and the casting thickness should not exceed 3cm each layer.
4. When the temperature is higher than 25 degrees Celsius, it will cure faster, please reduce the number of mixing/casting by half, or it will be hardened in the container;
5.Curing time will be depend on room temperature and casting thickness , the room temperature higher it is, the faster curing it does. The thinner it cast the longer curing time it needs;
FAQ:
Q: Are you trading company or manufacturer?
A: We have our own Equipment and Glue factories.
Q: Do you provide production testing?
A: We provide samples for your own testing, tests done by us are also available. We will be glad that you try our samples before
you buy in large quantities. After using the sample, if it does not meet your needs, please discuss with us. We can adjust the
proportion or nature of the glue for you to achieve the product that best meets your needs.
Please contact us for more information.
Q: Why choose us?
A: We have done many OEMs, enable us to suggest you the best solution.
Q: What is the curing time?
A: The cured time of the gel depends on different situation, ex: the depth of the mold, the color of the gel or the light source.
Q: How to keep the Epoxy resin?
A: The shelf life of the product is 12 months; keep away from direct sunlight exposure and always keep the cap sealed.
Q: Is the Epoxy Resin safe to use?
A: Yes, our Epoxy Resin has certification in SDS, TDS, Food Safe, Heavy Metal, Plasticizer and Skin Irritation Tests.
Packaging:
We offer different size of packaging, 5kg buckets and 20kg buckets are normal size. Customized
