Description:
Our Aorun-1102 is an epoxy resin adhesive cured under normal temperature and heating conditions. It has good transparency, good surface gloss and good natural defoaming.
Application:
Epoxy resin 1102 is specially used for module potting, mold potting and other electronic parts insulation, moisture-proof potting, confidentiality sealing, etc.
Specification:
| Items | Units/conditions | Technical Data |
| Viscosity | Shore-D | 80-85 |
| Volume resistivity | 25℃/ Ω./ cm | 4.3x1015 |
| Surface resistivity | 25℃/ Ω. | 2.6x1014 |
| Dielectric strength | 25℃ KV/MM | 25 |
| Coefficient of linear expansion | CM/K | <6.1x10-5 |
| Glass transition temperature | ℃ | >90 |
| Temperature resistant | ℃ | -60~120 |
The above performance data is typical data measured in a laboratory environment
with a temperature of 25°C and a humidity of 70%. It is for customer reference only
Notice:
1.According to the ratio (weight ratio), mix the A and B agents thoroughly.
2.Before using it in large quantities, please try it a small amount and control the amount of glue.
3. If you accidentally stick to the skin, please wash it with soapy water and disable solvent cleaning.
FAQ:
Q1. Will the Table Epoxy Resin turn yellow over time?
A: No, because we add HALS, which is UV protection, it won't change yellow.
Q2. Does this Table Epoxy Resin tend to scratch over time?
A: Our product is Scratch Resistance, Heat Resistance, Electrical resistance.
Q3. What is the ideal temperature to make mixtures?
A: The optimal temperature is 25 degrees celsius, because our laboratory temperature is 25 degrees celsius, but a little hotter or colder is also ok.
Q4. How long can last if it is not mixed?
A: The shelf life is about 12 months, if you keep it well.
Q5. What payment terms do you accept?
A: Payment for TT, LC at sight. If you have good Credit or we cooperate long time, the OA, DP, CAD also workable.
Q6. Could you accept OEM for Table Epoxy Resin?
A: Yes, we can do the packing according to your demand, the packing bag and the label all can do your brand.
Q7: What tool or other material do I need for Table Epoxy Resin?
A: You need a weighing machine and a container to hole the resin. If do river table or Art Crafts you may need some pigments and accessories.
Packaging:
We offer different size of packaging, 5kg buckets and 20kg buckets are normal size. Customized
